Thingiverse
Pro DnD Case V2
door Berko
46
Downloads
22
Likes
1
Makes
"This Design is Free to Download and Print - Also free to Edit and Modify!"
}}}})))) Edit it online https://www.tinkercad.com/things/dnL7yfnib7y (((({{{{
This design is Ver 3.0 !!!
The miniature section is designed for 2 X 25mm base miniature with a 26mm gap and space for Tall miniatures!
Can hold 3 sets of dice for Gaming and has room for 3 pacers (Mechanical Pencil), Rubbers, Lead Refills and Pencil Sharpener!
The lid is designed as a small dice tray! (not pictured - but i glued some felt fabric to the top of the lid to reduce annoying sound - Works Really Well!!!)
No need to use supports on the lid slide grove if you are using 100% fan!!!
The Lid might need a 1% to 2% reduction on the width as the gap tolerance at 0.2mm and can be tight fit depending on your 3D Printer!
The Lid and Box Design is made to have 4 2X3mm Magnets to keep the lid closed as previous designs have been known to loosen up and come open. - but can be edited from the Link
}}}})))) Edit it online https://www.tinkercad.com/things/dnL7yfnib7y (((({{{{
This design is Ver 3.0 !!!
The miniature section is designed for 2 X 25mm base miniature with a 26mm gap and space for Tall miniatures!
Can hold 3 sets of dice for Gaming and has room for 3 pacers (Mechanical Pencil), Rubbers, Lead Refills and Pencil Sharpener!
The lid is designed as a small dice tray! (not pictured - but i glued some felt fabric to the top of the lid to reduce annoying sound - Works Really Well!!!)
No need to use supports on the lid slide grove if you are using 100% fan!!!
The Lid might need a 1% to 2% reduction on the width as the gap tolerance at 0.2mm and can be tight fit depending on your 3D Printer!
The Lid and Box Design is made to have 4 2X3mm Magnets to keep the lid closed as previous designs have been known to loosen up and come open. - but can be edited from the Link
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
