Pro-Line Ambush Leaf Spring

I designed this to replace the metal leaf springs on my Pro-Line Ambush RC Crawler. The metal leaf springs get kinked often and are a bit too stiff for my liking. So I'm hoping this will be a much softer ride, allow the vehicle to sit a little lower, offer more articulation, and not get kinked as easily.

Let me know if you'd like to see anything else for the Pro-Line Ambush!

Update! The original file was too thin! I've updated and the new file is proline ambush leaf spring replacement v0.2.stl

Update! I think having the holes in the design compromises and complicates the print. I added a version that does not have any holes as well as a version that does not have the center hole. Print then drill out the holes as needed. The center hole is approximately 1mm and the 2 eye holes are 3mm. I haven't tested this out yet. I think that the "proline ambush leaf spring replacement NO CENTER HOLE.stl" file will likely be the best print.