Thingiverse
Pro trinket box
por jimlee
39
Descargas
32
Likes
0
Makes
A printable box to fit an Adafruit Pro Trinket processor.
The processor & charging setup are mounted to the bottom of the box by a couple 2mm socket cap screws. Bosses for these are printed in the bottom of the box.
There is also room to fit a 150mah lipo battery and more left over for some sensors & wiring.
The processor : https://www.adafruit.com/product/2000
The charger : https://www.adafruit.com/product/2124
The Lipo battery : https://www.adafruit.com/product/1317
The switch : https://www.adafruit.com/products/805
The little 8x8 LED matrix : https://www.adafruit.com/product/959
The tiny little mounting screws : https://www.boltdepot.com/Product-Details.aspx?product=6358
This example is being used to run a rechargeable LED matrix pattern generator for kids. Video link : https://vimeo.com/128328337
I've included the Solid works source file so people can modify the box to suit their needs.
The processor & charging setup are mounted to the bottom of the box by a couple 2mm socket cap screws. Bosses for these are printed in the bottom of the box.
There is also room to fit a 150mah lipo battery and more left over for some sensors & wiring.
The processor : https://www.adafruit.com/product/2000
The charger : https://www.adafruit.com/product/2124
The Lipo battery : https://www.adafruit.com/product/1317
The switch : https://www.adafruit.com/products/805
The little 8x8 LED matrix : https://www.adafruit.com/product/959
The tiny little mounting screws : https://www.boltdepot.com/Product-Details.aspx?product=6358
This example is being used to run a rechargeable LED matrix pattern generator for kids. Video link : https://vimeo.com/128328337
I've included the Solid works source file so people can modify the box to suit their needs.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
