probeClothespeg-001

- probeClothespeg-001
- A simple way to secure pinless or pinned OLED displays for connection to arduino/pi/etc
- Rotate the STL's yourself
- No supports required.
- 0.4mm nozzle with *0.4mm external perimeters specified in your slicer* are always assumed with my things.
- Yes, the pins and spring I have included in the DISPLAY stl are accurate and good references for designing around these objects.
- The DISPLAY stl, is just for assembly reference.

- Uses:
- 1x M3x8mm(or 10mm) and nut
- 1x M3x10mm and nut
- 1x M3x20mm and 2xwasher and 2x nuts (or a single M3 nylock) (only one nut is shown in the DISPLAY stl, but i use two to lock them on)
- 4x Pogo Pin - P75-E2 Spring Test Probe https://www.aliexpress.com/item/50pcs-P75-E2-Dia-1-02mm-100g-Spring-Test-Probe-Pogo-Pin-Free-Shipping-Wholesale/813753643.html
- 1x spring - 0.8Wire 10ODx15mm Long
- 1x dupont female 4socket....and wiring to suit.

- NOTE:
- I used a 4socket female dupont inside