Probemaster 8000 Series Probe Mounts

A quick wall mount for the superior ProbeMaster 8000 Series test probes (seriously, if you don't have them, they're some of the best probes you can get, super flexible). I initially designed this to mount via Command Strips since I was in a dorm and couldn't screw anything to the wall, so the back is flat.

Unfortunately somehow I must not have saved the final version in Fusion 360, so unfortunately I can't add mount holes directly, but if you do want to fasten it to a wall, it should be easy enough to add (either the STL or just drilling through the finished print).

I'd recommend printing it vertically with the probe prongs on the bed, as that will probably provide the best vertical strength. If you want to mount via Command Strip, then I would still recommend printing vertical and then afterwards sanding the back until its smooth enough for the command strip to adhere well.

I printed mine in PETG so that there's a little bit of flex such that the probes can po