Thingiverse
Programable Time Lapse
17
Download
19
Likes
0
Makes
This is a programmable time lapse for a Go-Pro where tiles on the track determines how it moves. The system can move in backward/forwards, rotate the camera and soon tilt the camera (when I get more time). It uses Lego train track as the track to guide it along and place programming tiles. The tiles are different colors which get a colour sensor reads and changes moving mode.
Currently, there are 4 colours with 4 different modes. Green (also starting mode) is full travel speed with no other movements. Blue is starting rotation of the camera. Yellow is half the speed. Red is stopping. More colours will be added soon.
The wheels are held in place with 2 x 20mmxM3 screws and driven by a 28byj-48 stepper motor. The system can be run from a 9V battery but cannot last long without being replaced.
The PCB can be purchased from https://tinkersprojects.com/product/time-lapse-controller/
The PCB files can be found at https://github.com/tinkersprojects/time-lapse-controller
Keep up t
Currently, there are 4 colours with 4 different modes. Green (also starting mode) is full travel speed with no other movements. Blue is starting rotation of the camera. Yellow is half the speed. Red is stopping. More colours will be added soon.
The wheels are held in place with 2 x 20mmxM3 screws and driven by a 28byj-48 stepper motor. The system can be run from a 9V battery but cannot last long without being replaced.
The PCB can be purchased from https://tinkersprojects.com/product/time-lapse-controller/
The PCB files can be found at https://github.com/tinkersprojects/time-lapse-controller
Keep up t
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!