Thingiverse
Project #MicroLongRange (4Inch)
door Pskelton330
6
Downloads
3
Likes
1
Makes
Thank you to Dave_C_FPV for the Project #MicroLongRange
This is my take on a few parts for the MicroLongRange
CNC Madness Dave_C_FPV frame (20x20) option
SucceX-D Mini F7 Twing stack
Caddex Ratel
RDQ Mach3 VTX (Was not a good choice but I made it work)
Camera mount body will need a small amount of support along the bottom.
Motor wire guides print solid and must be partially split with a razor knife for sliding the wires in (see picture)
If you have any suggestions how I might improve these designs please let me know.
This is my take on a few parts for the MicroLongRange
CNC Madness Dave_C_FPV frame (20x20) option
SucceX-D Mini F7 Twing stack
Caddex Ratel
RDQ Mach3 VTX (Was not a good choice but I made it work)
Camera mount body will need a small amount of support along the bottom.
Motor wire guides print solid and must be partially split with a razor knife for sliding the wires in (see picture)
If you have any suggestions how I might improve these designs please let me know.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!