Thingiverse
Project Orion
von VogelZoo
6
Downloads
12
Likes
0
Makes
https://en.wikipedia.org/wiki/Project_Orion_(nuclear_propulsion)
Ship was designed from the sketch from the original proposal (page 6): https://ntrs.nasa.gov/api/citations/20000096503/downloads/20000096503.pdf
Each part should be printed upright. Most parts will require supports which will require some elbow grease to remove.
Version 2 update:
- Added some simple removeable supports to the bottom section. Will still need to print with supports on but should allow you to remove the majority of the auto-generated support structure and remove the cone after printing.
- Split the storage module into 2 pieces for support simplification. Should now be significantly easier to remove supports from the bottom half of the module.
- Reoriented all parts so they default in the print direction.
Ship was designed from the sketch from the original proposal (page 6): https://ntrs.nasa.gov/api/citations/20000096503/downloads/20000096503.pdf
Each part should be printed upright. Most parts will require supports which will require some elbow grease to remove.
Version 2 update:
- Added some simple removeable supports to the bottom section. Will still need to print with supports on but should allow you to remove the majority of the auto-generated support structure and remove the cone after printing.
- Split the storage module into 2 pieces for support simplification. Should now be significantly easier to remove supports from the bottom half of the module.
- Reoriented all parts so they default in the print direction.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
