Thingiverse
Project Triton
door suraj022
46
Downloads
44
Likes
0
Makes
Project Triton is a micro quad inspired by the very popular DJI ryze Tello.
All electronics can be housed inside the body, Except the battery on which I'm currently working on.
Stuff required:
1. 4x 8520 brushed coreless motors.
2. SP racing f3 evo brushed flight controller.
3. Ryze Tello propellers.
4. ESP12e board (preferably custom-made).
5. 1100 mAh Lipo battery 3.7v 20c.
Firmware used: INAV.
PID settings : (Only if using exact same setup ) compatible with Cleanflight, Betaflight and INAV. They're not the best PIDs( i'm not an expert), but it makes the quad stable enough.
Roll : P-34 I-30 D-22
Pitch : P-34 I-30 D-22
Yaw : P-85 I-45 D-0
All electronics can be housed inside the body, Except the battery on which I'm currently working on.
Stuff required:
1. 4x 8520 brushed coreless motors.
2. SP racing f3 evo brushed flight controller.
3. Ryze Tello propellers.
4. ESP12e board (preferably custom-made).
5. 1100 mAh Lipo battery 3.7v 20c.
Firmware used: INAV.
PID settings : (Only if using exact same setup ) compatible with Cleanflight, Betaflight and INAV. They're not the best PIDs( i'm not an expert), but it makes the quad stable enough.
Roll : P-34 I-30 D-22
Pitch : P-34 I-30 D-22
Yaw : P-85 I-45 D-0
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
