Thingiverse

Prusa LCD Hinged Cover

von medyk3D

22 Downloads

13 Likes

0 Makes

This is still a Work In Progress.

Prusa LCD Hinged Cover is used to mount the Prusa LCD display outside the Ikea Lack enclosure.

Fusion 360 file attached.
The STLs for now are 10x times bigger, so scale them in the slicer or use PrusaLcdCoverHinged.zip.amf (click 'No' during import - see the attached image)

You need to print:
LcdCoverHinged.stl - this part is a remix of original Prusa LCD cover. It is wider and has hinges at top
LCDTopHinge.stl - this part is attached to the bottom of a Ikea Lack bottom tabletop.
Hook.stl - this one is to hold the cover in place and it needs some improvement. For now there are two versions with thin and thick central part. It's tricky to get it right so it can easily snap while closing/opening the cover and to hold it firmly.

BOM:
- 4 wood screws (3 for the upper hinge, 1 for the hook),
- piece of 4mm 165mm wire (this is actually the dimennsions of the hinge hole)

There are two things to be improved:
The hook,
Change the diameter

cover lcd LCD Cover lcd hinge lcd hinged cover medyk medyk3D medyk 3d prusa prusa i3 prusa i3 mk3 cover lcd LCD Cover lcd hinge lcd hinged cover medyk medyk3D medyk 3d prusa prusa i3 prusa i3 mk3

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat