Prusa LED mounts

After installing the new R3 extruder body for my MK2.5, I was disappointed to discover that the few frame mounted accessories I had no longer cleared the thicker body.

I had already heavily modified the LED mounts I got from another site, but that design simply wasn't going to work, so I decided to design my own from scratch.

Fortunately the LEDs I have are wide enough to sit perfectly on top of the Z brackets, so I designed these to bolt onto the back of the Z brackets.

You'll need 4 M3x18 or M3x20 bolts and nuts to replace the stock M3x10 bolts. Simply remove the stock bolts, replace with the longer ones and tighten. Then slip these on from the rear, put the nuts on, and snug them up.

These were designed for https://www.amazon.com/gp/product/B06Y5K4GBP/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1 strips, but since it just uses zip-ties to attach them, should work with other rigid strips. If not, I've included the Fusion 360 file so you can modify to suit.