Prusa Mini Hexagon Handle

## Description

A durable handle to help carry the Prusa Mini around, designed to match the Prusa Mini base! This is a simple, yet durable, handle for the Prusa Mini. It was designed to match the [David Warboss Mini Base](https://www.printables.com/model/63483-prusa-mini-base). It attaches to the Z axis using screws and t-slot nuts.

## Materials

In order to attached these you need some t-slot nuts and screws. I used:

* [3030 Series T-Slot Nut M6](https://amzn.to/4a1xp6e)¹
* [M6 x 12mm Button Head Screw](https://amzn.to/4fCQYmk)¹
* Here is the [Prusament PETG](https://amzn.to/4a0CUCc)¹ that matches the Mini

## Print Instructions

I was able to print this handle with no support material, but the surface finish did suffer a bit on the bottom and in the holes for the screws. You could try either way, but the included GCode is no supports, otherwise I recommend:

* Layer Height: 0.15mm
* Infill: 30%
* Supports: Not needed

*1) This post contains affiliate links, any link marked with ¹ i