Prusa Mini X Alignment Tool

NOTE: This tool DOES NOT fix offset to the left... sorry :(

I've created a simple tool to fix the common issue of the Prusa Mini printing with an offset of a few mm to the right. If you don't really care about it then you can just leave it , but if you do then this tool will fix it for you. Here's what you need to do (photos show this process):

1: Download and print the 'Bed Alignment Tool'. Make sure to turn OFF any skirt or brim you might have enabled, as this print takes up the whole build area.
2: Measure the X offset with a pair of calipers or a ruler if your don't have any (make sure to write it down somewhere).
3: Work out 15 - [Your X offset], and write this down.
4: Download the 'X Axis Calibration' and open it in tinkercad.com
5: Drag a 'hole' box into your workplane.
6: Resize it to your calculated number.
7: Select both objects and press 'Align'.
8: Align to the left then to the middle.
9: Press 'Group'.
10: Press 'Export', then 'Export as STL'.
11: Print th