Thingiverse
Prusa Mk3 Mod Collection
door Barbarossi
71
Downloads
39
Likes
0
Makes
Collection of mods i think are usefull for the Prusa MK3.
Cablemanagement:
The Extruder cables will only move in one plane and don't get twisted, cable life will definitely increase.
3mm Nylonstrand should be removed
Standard Chain Clip 1x
Chain to Cableloom 1x
cable extendomatic 1 & 2 1x
CarriageBack_revA-02 1x
Einsybase V3 1x
Heatbed Cover; optional
PSU:
the Cover and Lid are modified so you can flip the Power-socket and use a Lefthand Plug.
Fixing Points have been moved 18mm forwards to be used with the Extrusion mod/quarter Bear shown in the Pictures
PSU-Cover-V3 1x
PSU-Lid-V3 1x
PSU-Bracket, only needed for the Extrusion mod/quarter Bear
Y axis:
Juiced Motor mount with end stop, does what it says on the tin.
Y_motor_R2.6 1x
Part cooling fan:
Not necessary better at cooling, but 100% more view of the Nozzle.
(the Fan shroud is not designed by me, unfortunately it has been taken down from Thingiverse or has been renamed)
Fan_Sh
Cablemanagement:
The Extruder cables will only move in one plane and don't get twisted, cable life will definitely increase.
3mm Nylonstrand should be removed
Standard Chain Clip 1x
Chain to Cableloom 1x
cable extendomatic 1 & 2 1x
CarriageBack_revA-02 1x
Einsybase V3 1x
Heatbed Cover; optional
PSU:
the Cover and Lid are modified so you can flip the Power-socket and use a Lefthand Plug.
Fixing Points have been moved 18mm forwards to be used with the Extrusion mod/quarter Bear shown in the Pictures
PSU-Cover-V3 1x
PSU-Lid-V3 1x
PSU-Bracket, only needed for the Extrusion mod/quarter Bear
Y axis:
Juiced Motor mount with end stop, does what it says on the tin.
Y_motor_R2.6 1x
Part cooling fan:
Not necessary better at cooling, but 100% more view of the Nozzle.
(the Fan shroud is not designed by me, unfortunately it has been taken down from Thingiverse or has been renamed)
Fan_Sh
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!