Thingiverse

Prusa SL1 Platform Drip Adapter

by Area51

33 Downloads

27 Likes

2 Makes

**IMPORTANT: [Get the latest updates for this model here on PrusaPrinters](https://www.prusaprinters.org/prints/5833-prusa-sl1s-speed-platform-drip-adapter).
In 2021, all updates and uploads of new models were moved to PrusaPrinters, of course still free and under the same conditions... :)**

The *Prusa SL1 Drip Adapter* holds the build platform at an angle to allow excess resin dripping of the platform and model.
The fixture is rigid and frees up both hands to release and grip the model, without worrying about dripping resin all over the place...

Use the two holes for the optional 8x3mm rare earth magnets (press fit) to easy store the adapter on the metal side of SL1 when not in use.

*>> If you like the model, please leave a like or a tip ;-)*

build build plate build platform drip dripper msla platform post processing prusa Prusa SL1 SLA build build plate build platform drip dripper msla platform post processing prusa Prusa SL1 SLA

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format