Prusa Super Case

This printer case (box) was inspired by John R's http://www.thingiverse.com/thing:787153. It is not a derivative or a make. I like the concept of using printed parts to assemble a printer case, but I also wanted a case that would allow me to easily adjust and maintain the printer. Thank you to John R for the concept.

The Prusa Super Case has fold down sides and front. All parts (hinges, braces, edging, etc) were designed from scratch by me.

You will need the following materials to build the Super Case:
a. Sheet of 5mm Plywood 1220mm (4') x 2440mm (8')
b. 53 M4 15mm (hex head screws, lock washers, and nuts)
c. 1 metre of ~3.2 mm (1/8'') steel rod to be cut to 60mm segments for hinge pins
d. 1 meter of 13 mm (1/2'') wooden dowel
e. Sheet of 2mm Plexiglass 500mm (20") x 500mm (20")
f. 12 M10 15mm (hex head screws, lock nuts)

Print:
a. 4 BottomHinges (Plywood to Plywood)
b. 2 BottomHingePlexi (Plywood to Plexiglass)
c. 4 Brac