Thingiverse
Prusament Sorting Tower MK3
door Fredslund3D
51
Downloads
40
Likes
0
Makes
For the instructions with pictures go to: https://www.prusaprinters.org/prints/82892-prusament-sorting-tower-mk3
Here it finally is, the third version of the PRUSAMENT sorting tower. And this time it requires even less filament and have more features!
Printing
If you just wan to get started printing, just take the G-Codes or the .3mf slicer files (PST MK3_Draw & Top Layer) and get cracking. Just makes sure to use the right filament either PLA or PETG. if you want to know what settings to use read this following section.
All parts should be printed in the orientation of the STL.
Drawers
The drawers are printed in PLA but can be printed in any material. I have printed the drawers with 0.2mm layers but higher or lower layers would also be fine.
The drawers are designed to be printed as spiral vase.
And to make the parts a bit more rigid you can preferably change the extrusion width to 0.65 or print with a 0.6mm nozzle.
If you want to print more then one draw a
Here it finally is, the third version of the PRUSAMENT sorting tower. And this time it requires even less filament and have more features!
Printing
If you just wan to get started printing, just take the G-Codes or the .3mf slicer files (PST MK3_Draw & Top Layer) and get cracking. Just makes sure to use the right filament either PLA or PETG. if you want to know what settings to use read this following section.
All parts should be printed in the orientation of the STL.
Drawers
The drawers are printed in PLA but can be printed in any material. I have printed the drawers with 0.2mm layers but higher or lower layers would also be fine.
The drawers are designed to be printed as spiral vase.
And to make the parts a bit more rigid you can preferably change the extrusion width to 0.65 or print with a 0.6mm nozzle.
If you want to print more then one draw a
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
