Thingiverse
PS3 Eye Camera wall mount
door PosquitoSan
2
Downloads
2
Likes
0
Makes
In this Remix I mod the original file to be a simple 90 degree wall mount for the PS3 Eye Camera. This is ideal to put the camera inside a cabinet to record timelapses of your 3D prints :)
The camera slides into the mount, no screws required. However, to fix the mount into the wall/wood/cabinet you will need 2 screws.
Also added 2 holes on top, so you can pass a ziptie and ties the USB cable very easily
Print this in any PLA or ABS you want; Support is needed.
Use any infill from 15% and beyond. The camera isn't too heavy after all
The camera slides into the mount, no screws required. However, to fix the mount into the wall/wood/cabinet you will need 2 screws.
Also added 2 holes on top, so you can pass a ziptie and ties the USB cable very easily
Print this in any PLA or ABS you want; Support is needed.
Use any infill from 15% and beyond. The camera isn't too heavy after all
PosquitoSan publiceert ook op
2 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
