Thingiverse
PSU Cover
door Wursterland
24
Downloads
18
Likes
0
Makes
Designed another PSU Cover to use MPX high Current Connectors like these: https://www.amazon.de/Multiplex-kompatible-Goldkontakt-Hochstrom-MR-Onlinehandel%C2%AE/dp/B00ON2EXL8/ref=sr_1_2?ie=UTF8&qid=1522691186&sr=8-2&keywords=mpx-stecker
Each contact is rated for 10A, so combining 3 pins for +12V and another 3 for GND gives me a save rating of 30A.
The female connector can be glued in the cover after installing the wiring.
For the switched mains socket I used one like these: https://www.amazon.de/Kaltger%C3%A4te-Anschlu%C3%9Fdose-Sicherung-Schalter-Netzanschlu%C3%9F-Joy-Button/dp/B00ZCMOIYA
Use a pair of 3,5x10mm countersunk self-tapping screw to fasten the socket.
This Cover will fit most Chinese 12V 360 or 480W Power Supplies (50 x 115mm).
Update 2018.04.03:
Changed the sidewalls of the PSU Cover to get more room for the internal wiring.
Each contact is rated for 10A, so combining 3 pins for +12V and another 3 for GND gives me a save rating of 30A.
The female connector can be glued in the cover after installing the wiring.
For the switched mains socket I used one like these: https://www.amazon.de/Kaltger%C3%A4te-Anschlu%C3%9Fdose-Sicherung-Schalter-Netzanschlu%C3%9F-Joy-Button/dp/B00ZCMOIYA
Use a pair of 3,5x10mm countersunk self-tapping screw to fasten the socket.
This Cover will fit most Chinese 12V 360 or 480W Power Supplies (50 x 115mm).
Update 2018.04.03:
Changed the sidewalls of the PSU Cover to get more room for the internal wiring.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!