PSX SD Mount (works with MODE)

I whipped up this sd card mount for my SCPH-5501 PS1 that I can use with the Terraonion MODE.

Notes:

1. I had it printed at i.materialise with the Polyamide MJF material with black dye. The mount was designed with that process in mind and may not work with with FDM printing.

2. It requires drilling 3 holes in the top case-half. The mount is secured to the top case-half because there isn't much room with the MODE installed. I countersunk tapered head screws.

3. The mounting holes are off by a few thou, but they are oversized so they still fit. Make sure to use a washer that is larger than the mounting holes (~7/32").

4. This is definitely not a battle tested design and may require some macgyvering on your part!

5. These are the adapters I used: https://www.amazon.com/gp/product/B08K2M99TG/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

The heat-shrink tube on the larger part of the adapter must be removed in order for it to fit