Psycho Mantis (hueforge)

Project: psycho mantis.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 143.4x199.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.1 PLA BambuLab Basic Blue Gray Transmission Distance: 1.5 PLA Sunlu Meta Grey Transmission Distance: 2.1 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #8 (0.8mm) swap to Blue Gray At layer #13 (1.2mm) swap to Grey At layer #17 (1.52mm) swap to Ivory White for the rest.