Pterodactylus - hueforge

This is 4 color Hueforge of Pterodactylus I uploaded two sizes 200x200 X1/P1/A1 and size 180x180 for A1 Mini. Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.8mm The Max Depth is 2.2mm and the Actual Depth is 2.1mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 4.7 PLA BambuLab Basic Gray Transmission Distance: 1.6 PLA BambuLab Basic Jade White Transmission Distance: 4.8 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #12 (1.04mm) swap to Gray At layer #15 (1.28mm) swap to Jade White for the rest.