PTFE Radius Guide Assy V2

11/11/22 - this model has been updated to a V2, as the V1 version was found in some instances to be making the problem it was designed to solve worse rather than better.V2 has a greater radius for the filament, less of a downwards angle out of the end, and a modified swivel mount piece to ensure it remains in place in all bed locations (the old version used to come loose when the hot-end assembly was over the poop chute.---------Created at the request of Wolf on Air (on the Bambu Lab Discord) who was intermittently having feed errors from the AMS unit.It seems with some filaments, the small bend that can occur directly above the head assembly can cause too much friction.This model is designed to:a) ensure a minimum radius is maintained on this tubingb) support the PTFE to ensure it's straight when entering the top of the the fitting on top of the extruder.As an added benefit, this also stops the PTFE tube slapping against the top glass when printing on the right hand side of the bed.I'