PTS20-Li B2 Parallel Guide

Hi everyone!I've created a small but useful modification for the parallel guide of the PTS20-Li B2 machine. The original version was crooked and too thin, so I decided to make it a bit sturdier. The modified guide is slightly larger than the original, but you will need 2XM3 embedded nuts and 2 M3x6mm screws to fix it on the slider, ensuring that the profile doesn't move. I recommend printing it with the large flat surface down, using a layer height of 0.12 mm, and no support is needed! I printed it using PET-G filament with 55% cooling.