PubGrip: GT Low Boy Flared

This model is a remix of the original 1mm PubGrip with the shape of the FM low boy flared footpads. Fitment is pretty spot on with stock sensor.1mm base is Sunlu 95a and CC3D 72d for the spikes. I do a pause at layer 6 to swap out the filaments. Download the .3mf file to print with the same settings I used catered to TPU printing. Overall print time is just over 8 hours for one grip. 3M 300LSE Sheets ( https://a.co/d/1rwdF1j )Remove one side of 3M wax paper layer and adhere to underside of PubGrip. If the PubGrip is going on a sensor, poke lots of holes in the PubGrip and 3M sheet to allow air to escape and not ghost the sensor. Cut the 3M sheet to the shape of the PubGrip with a razor blade or Exacto. A fresh Exacto will be the best option for cutting. Remove the second wax paper layer, and adhere to your surface. If applying on a sensor, press it on starting from the middle and working outwards.