MakerWorld
Sport & Outdoors
Go to Model
PubGrip: Square
84
Downloads
16
Likes
17
Makes
PubGrip: Square Included are 1mm and 3mm base versions (meaning the base where the spikes sit on top are either 1mm or 3mm thick)and each of those version has a 320x320 mm or 250x250 mm version. The 250x250 version should fit Bambu print beds no problem if you do the modification to unlock full bed volume: https://wiki.bambulab.com/en/knowledge-sharing/print-volume-limitationsI recommend using a griptape template ( https://makerworld.com/en/models/579551?from=search ) in CAD to create a printable pad shape rather than straight cutting. Use the .dxf file to extrude a object, then intersect them to get a printable pre-shaped PubGrip file.The spikes are 3mm tall from the top side of the base, giving a great amount of penetration into the bottoms of shoes. Dry you tpu and print slowwwwwww. Can do pause at specific layer heights for mutlicolor/material action. I have been running a 72D tpu for the spikes and 95a for the base it is very grippy. Will try running ~80a for the base to get a mor
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!