Thingiverse

Puck Screen Cleaner/Dryer

von c93010

5 Downloads

1 Likes

0 Makes

Place puck screen inside and run under water in sink to clean screen. Or store puck screen on it for drying. Print in PETG so it doesn't warp in hot water. Opening is 60mm in diameter with a 55mm diameter catch. Designed for 58.5mm puck screen. Magnetic version takes 10mm x 2mm magnets to stow on side of cabinet.

Print at 100% scale for 58.5mm puck screen

Print at 92% scale for 54mm puck screen

54mm 54mm screen 585 585mm 585mm screen 58mm 58mm portafilter 58mm screen coffee filter espresso filter espresso screen Portafilter filter portafilter screen puck filter Puck screen puckscreen

Quelle

Thingiverse

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat

STL

Material

PLA, PETG

Nachbearbeitung

Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Puck Screen Cleaner/Dryer

Zur Sammlung hinzufügen