Pulsar Hopper

If you strugle try to feed your pulsar extruder, when the hopper is almost full, this hopper will help reduce the preasure created by the linevac.I use a 30L compresor, without the hopper is almost imposble to recharge the inner cavity of the pulsar, because the preasure created inside the chamber, make the venturi to blow air backwards, with this device there is lots of room to the air to scape, and make the venturi work with a really small compresor.You can connect the original hose sended by dyze in the top of the hopper, or just a regular hose with an inner diameter of 20mm using a reusable metalic cable tie