Pumpkin patch bookmark

DescriptionPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 50 x 140mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.76mm Filaments Used:#000000 PLA BambuLab Basic Black Transmission Distance: 0.6#9d432c PLA BambuLab Basic Brown Transmission Distance: 2#ff8000 PLA BambuLab Basic Orange Transmission Distance: 7#fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 Swap Instructions:Start with BlackAt layer #10 (0.88mm) swap to BrownAt layer #13 (1.12mm) swap to OrangeAt layer #16 (1.36mm) swap to Sunflower Yellow for the rest.