Push-Pull button for A320 FCU

After a first version using a well-known encoder with push button, I found that the feeling of pushing was too different from the pulling one.
So this v2.0 is now using an encoder without push-button fonction, and 2 identical buttons.

Encoder:
https://fr.aliexpress.com/item/4000928690158.html?spm=a2g0s.9042311.0.0.27426c373YaB75

Buttons:
https://fr.aliexpress.com/item/32699776287.html?spm=a2g0s.9042311.0.0.27426c37Y6NPBD

I chose standard print settings, glued the buttons and encoder, and it works well.
You will need a 30mm M3 screw too.

The distance between the two 3.5mm holes of your panel should be 36.2mm (see picture)

Enjoy !