Pushrod Clip

In 3d printed RC planes from 3Dlabprint control arms are relatively thick (about 4-6mm).
I didn't want to use z-bend pushrods, so i decided to design pushrod clips.
The clips are intended for a pushrod with a diameter of 1 and 1.2 mm


Print settings (very important!)
Print from PETG
In high temperature (min 235oC)
Without cooling of printed elements.
Slow speed (30 - 40 mm/s)
Print at least 10 clips at a time

After printing, be prepared for long postprocessing with a sharp knife and drills

My other designs for 3dlabpint p-38:
Motor mount: https://www.thingiverse.com/thing:4078761
Wheels: https://www.thingiverse.com/thing:4078785
Spinners: https://www.thingiverse.com/thing:4078812
ESC mount: https://www.thingiverse.com/thing:4175154