PVC Connector for Projects

This can be used to connect sections of PVC pipe together. Cut the PVC to length and place one of these connectors in each section. Use a bolt to hold them together. The teeth allow you to adjust the angle. There is a 12 tooth and a 30 tooth version. As created it should fit PVC with an inner diameter of 0.5", it has a 1 degree draft.

6/24/2018 Added parts for hypercube or body centered cubic.

6/22/2018 Added a part for a dodecahedron. Need to print 20 of these to make it work.

10/15/2017 Added a tetrahedral part, could be used for molecular modeling if scaled down for small tubing.

10/7/2017 Added a 12 tooth version with right and left parts so it can go together to make a 90 degree or 180 degree angle. This is more useful on smaller parts which have trouble with the teeth meshing together.

10/2/2017 Added 24 (15 degree) parts which are capable of 75 degree, 90 degree, 105 degree angles, etc.

Added another section which should center on the middle of the pipe