Thingiverse
PVC_Splitter
por Luis_Hernandezv
1
Descargas
2
Likes
0
Makes
this is aimed to use as a last resource inside a hospital it serves like the usual splitter spread arround the internet but it's faster and cheaper to produce even on an opensource printer.
this are just three couplings for a standard 3/4" hidraulic PVC pipe fitting you can buy at home depot or amazon in huge quantities.
it's aimed to be printed on ABS to be properly sterilized but if you can't get some PLA should work just fine. turn of your support settings but you may want to keep the adhesion between skirt and brim on order to guarantee the printability.
you shoud print this as solid as posible so pleas increase the perimeters count to 10 or so and crank up that infill to 100% it end up solid as can be.
i'm not interested in donation.
but if you help someone please comment here and let them know were you got the file so more can help.
be well and good luck.
this are just three couplings for a standard 3/4" hidraulic PVC pipe fitting you can buy at home depot or amazon in huge quantities.
it's aimed to be printed on ABS to be properly sterilized but if you can't get some PLA should work just fine. turn of your support settings but you may want to keep the adhesion between skirt and brim on order to guarantee the printability.
you shoud print this as solid as posible so pleas increase the perimeters count to 10 or so and crank up that infill to 100% it end up solid as can be.
i'm not interested in donation.
but if you help someone please comment here and let them know were you got the file so more can help.
be well and good luck.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
