Thingiverse
PWM Housing
von akf_was_here
26
Downloads
17
Likes
0
Makes
A housing for some PWMs I got from ali express (e.g.: https://www.aliexpress.com/item/Free-Shipping-DC-New-1-8V-3V-5V-6V-12V-2A-Low-Voltage-Motor-Speed/32610905123.html?spm=a2g0s.13010208.99999999.283.x3ftfS) .
The bottom has small clips that mate with small slots in the top piece.
M2x4mm screws can be used to attach the board to the lower piece (probably up to 6-7mm length would work). 3mm holes are in the upper housing to attach the entire assemble to something else.
The bottom has small clips that mate with small slots in the top piece.
M2x4mm screws can be used to attach the board to the lower piece (probably up to 6-7mm length would work). 3mm holes are in the upper housing to attach the entire assemble to something else.
akf_was_here veröffentlicht auch auf
37 zusätzliche Modelle auf 2 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
