Thingiverse
Pygamer cover
by sttos
2
Downloads
3
Likes
0
Makes
A cover for the Adafruit Pygamer.
The case can be printed in two ways. Either print the two all in one parts (top and bottom) then assemble with Nylon M2 screws and bolts. The drawback to this is the top of the case has to print face down, so it will have a rougher finish.
To print with the top of the case being your top layer, you'll need to print:
Top only
Bottom only
Top spacer
Bottom spacer (2 copies)
Then assemble with nylon m2 bolts and screws. https://www.jaycar.com.au/m3-x-25mm-nylon-screws-pk-10/p/HP0142 Cut the screws to length with side cutters
Button stls are available from https://www.thingiverse.com/thing:3686964/files
Designed using the Pygamer stl produced by Adafruit. Find it at https://blog.adafruit.com/2019/05/29/new-cad-part-adafruit-pygamer/
The case can be printed in two ways. Either print the two all in one parts (top and bottom) then assemble with Nylon M2 screws and bolts. The drawback to this is the top of the case has to print face down, so it will have a rougher finish.
To print with the top of the case being your top layer, you'll need to print:
Top only
Bottom only
Top spacer
Bottom spacer (2 copies)
Then assemble with nylon m2 bolts and screws. https://www.jaycar.com.au/m3-x-25mm-nylon-screws-pk-10/p/HP0142 Cut the screws to length with side cutters
Button stls are available from https://www.thingiverse.com/thing:3686964/files
Designed using the Pygamer stl produced by Adafruit. Find it at https://blog.adafruit.com/2019/05/29/new-cad-part-adafruit-pygamer/
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!