Python AMS enclosure hinge

Steps to Install the Print-in-Place Hinge:1. Modify the Upper Back Lid:Locate the 3 middle screws in the upper back lid of the AMS unit.Remove these screws.Replace them with M3x16 or M3x20 screws, which will hold the hinge in place. Make sure they fit snugly and allow the hinge to pivot correctly.2. Prepare the Top Plate:Mark the locations where the hinge aligns with the top plate.Drill 3mm holes at these marked locations to accommodate M3 screws.Be cautious with the drilling depth to avoid any