Slicer Discord
Python Enclosure Dual PC4-M6 M14 Plug – 3D-Druckmodell von MakerOnline MakerOnline
Python Enclosure Dual PC4-M6 M14 Plug – Bild 1 Python Enclosure Dual PC4-M6 M14 Plug – Bild 2 Python Enclosure Dual PC4-M6 M14 Plug – Bild 3 Python Enclosure Dual PC4-M6 M14 Plug – Bild 4 Python Enclosure Dual PC4-M6 M14 Plug – Bild 5 Python Enclosure Dual PC4-M6 M14 Plug – Bild 6
3D Printer

Python Enclosure Dual PC4-M6 M14 Plug

105 Downloads
35 Likes
0 Makes
Zum Modell
Python Enclosure M14 Plug for dual PC4-M6 Remixed M14 plug/port for the back of the Python enclosure to mount dual PC4-M6 fittings (Inside and outside the enclosure)   This is so you can have one PTFE tube going from the AMS to the fitting on the inside. Then another PTFE tube from the outside of the enclosure to the printer.   You can use both blue and black capped fittings. Blue capped fittings have a stop inside the fitting so the tube can not pass all the way through. Black capped fittings have a 4mm hole through so the tube can pass the whole way through. Even if you use a black capped fitting there is a stop within the M14 plug where the tube will bottom out.  
Kategorie
3D Printer
Quelle
MakerOnline
Veröffentlicht
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
2 Farben
Einteilig 2 Farben / AMS Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Polycarbonate
Farben
2 (AMS/MMU empfohlen)
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen