Thingiverse
QAV CodeRed Go Pro Session Mount
von Lumenier
4
Downloads
7
Likes
0
Makes
These parts are intended to be printed out of TPU.
Two perimeters and about 40% infill should work fine for both parts.
The HS1117 camera mount is modified from the original, so that the Session mount can use both of the 25mm standoffs at the top of the frame. The FPV camera still uses from the front standoff for mounting, but it needs a m2x6 and nut as well to be secure.
Two perimeters and about 40% infill should work fine for both parts.
The HS1117 camera mount is modified from the original, so that the Session mount can use both of the 25mm standoffs at the top of the frame. The FPV camera still uses from the front standoff for mounting, but it needs a m2x6 and nut as well to be secure.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
