QF-R1E

[WARNING]Original version of model is Only Compatible with RC-V6E2(Not RC-V6) cartridge.The cartridge requires 30mm * 1.5mm rubber bandPlease Print All Compatible profile for other version of cartridges.DO NOT cause impact to the loaded cartridge. It might launch itself.[PRINT SETTINGS][The Gun]Layer Height: 0.28mmWall: 2Infill: 8%, gyroidSupport: linear/grid [The Cartridge]Layer Height: 0.28mmWall: 1Infill: 5%, gyroidSupport: tree [ASSEMBLY] [CHECKING]After printing the cartridge, push the bottom of the casing to loosen the spring.Insert the rubber band and the projectile and push the bottom of the casing to see if the cartridge works.3. Remove the chamber of the gun and see if the hammer works properly.You can put your finger on the hammer to see if the hammer is stong enough.<figure class="image image_resized" style="width: