Qidi Bed Leveling Nuts

I printed Zogzogzog's Leveling Nuts and they worked great, although I felt they were missing one element that could make them work even better. The M4-.7mm locknuts that you need to press into these handles, equates to .7mm per revolution. The original design had 8 clicks (parts of the knob that stick out to grab onto) on the knob. The equated to approx. 87 microns per click. in Metric, we like to use more rounded numbers (50 microns, 100 microns, 150, 200, etc...) so in this REMIX design, each click is exactly 50 microns (.05mm). When a corner or your bed is a little off, all you need to do is add or subtract 1 click (1/2 of a typical layer height...if you are printing in 100 microns). Just eye something in the printer and turn it until the knob has made one click of a turn.

As far as bed leveling goes... here is what I do.

I did not replace the bed leveling springs, as I feel the springs are more than adaquite for the job at hand. My issue with the springs is they were wa