QIDI X-MAX 3 Toolhead

Due to the heat issues that could affect the QIDI 3 Series tool head some clogs were redesigned to improve airflow and to reduce the hotend and tool head electronics temperature. This mod was created for QIDI X-MAX 3, as 3 models are similar and should fit all or some parts, please check before print.  This is a 3 (or 4 depending on mod) part mod: Extra material needed: You can use the stock screws to mount the mod 5015 standard fan, we used Sunon Maglev to improve airflow and reduce the noise… if you choose the standard fan version x8 - 6x1.5mm magnetic neodymium… if you choose the magnetic version Print in ABS/ASA or similar filament with good temperature support, 4 walls, 4 top/bottom, 20% infill gyroid and tree supports only in bed needed. Changelog: