Thingiverse
QLG1 GPS Case
por dgdimick
1
Descargas
2
Likes
0
Makes
Have a QLG1 GPS for a WSPR radio? Don't know how to remote it away from the radio? Well, now you have a case to at least try and do this.
The "bottom" side has a 15mm (5mm thick) "punch out" if you want to convert the QLG1 to use an external antenna, just punch out the hole, and feed a cable to the SMA connector.
I'm still testing the case, so it may change in the next few weeks, just an FYI.
Print Data -STL's sliced at .16mm 50mm/S with a .4mm Nozzle, walls at 1.2mm, 20% infill.
Top - 32 grams, 10.88 meters of filament, time to print 4:44
Bottom - 32 grams, 10.94 meters of filament, time to print 4:34
Clamp - 1 gram, 0.48 meters of filament, time to print 0:17
Version:
1.1 - Reduced the outsides of the case from 3mm to 2mm
1.0 - First release - have at it.
The "bottom" side has a 15mm (5mm thick) "punch out" if you want to convert the QLG1 to use an external antenna, just punch out the hole, and feed a cable to the SMA connector.
I'm still testing the case, so it may change in the next few weeks, just an FYI.
Print Data -STL's sliced at .16mm 50mm/S with a .4mm Nozzle, walls at 1.2mm, 20% infill.
Top - 32 grams, 10.88 meters of filament, time to print 4:44
Bottom - 32 grams, 10.94 meters of filament, time to print 4:34
Clamp - 1 gram, 0.48 meters of filament, time to print 0:17
Version:
1.1 - Reduced the outsides of the case from 3mm to 2mm
1.0 - First release - have at it.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!