Quad Lock compatible mount w 19mm clamp

**updated print profile for a recessed captured hex nut for more pull out strength of m3 screw** Origincal profile relies on self-tapping and non-captured nut. Needed an odd sized clamp for my quadlock for my chariot so I printed one. Print in PETG or something more robust than PLA as the screws self-tap into the plastic. Assembly is straight forward using 3 M3x20 screws with an optional hex nut that you can thread right under the top cap to make assembly a little easier. I used beefier springs sized 1.2x20x25mm instead of going pen harvesting. Assembly is easiest attaching the clamp to the bar first and then putting top can into the spring container and then driving the 3rd m3 screw through the top into the top clamp piece. You should put a hex nut on the 3rd M3 to hold it in place as the threads can pull out over time and abuse. make sure you seat the 3rd screw all the way so it is fully recessed into the top cap. Supply your own:Spring x1 (link and description above)M3x20 socket cap