Thingiverse
Quad X 250
by nulluser
53
Downloads
35
Likes
0
Makes
250 Class X Style Quadcopter
Optimized for 3d printing with no support material
75% infill, PLA
Designed for:
CC3D Flight Controller
Spektrum Satellite RX
1000 mAh 3C Lipo Pack
Emax MT2204 Motors
12A ESC, Generic
Gemfan 5030 Propellers
FPV Options
FatShark 600 TVL CMOS V1
Eachine ET200 TVX
Other Parts:
8 - M3x10mm Bolt - Steel
4 - M3x30mm Bolt - Steel
4 - M3x16mm Bolt - Nylon
12 - M3 Nylock Nut - Steel
4 - M3 Nut - Nylon
The prototype flies great.
325 grams RTF with no FPV gear.
390 grams RTF with FPV gear.
Total cost should be around $150 with no FPV.
Revisions:
R1.7 - Initial Release
R1.8 - Strengthened Upper and Lower Plates. Removed ESC Slot from Arm. Added FPV
Optimized for 3d printing with no support material
75% infill, PLA
Designed for:
CC3D Flight Controller
Spektrum Satellite RX
1000 mAh 3C Lipo Pack
Emax MT2204 Motors
12A ESC, Generic
Gemfan 5030 Propellers
FPV Options
FatShark 600 TVL CMOS V1
Eachine ET200 TVX
Other Parts:
8 - M3x10mm Bolt - Steel
4 - M3x30mm Bolt - Steel
4 - M3x16mm Bolt - Nylon
12 - M3 Nylock Nut - Steel
4 - M3 Nut - Nylon
The prototype flies great.
325 grams RTF with no FPV gear.
390 grams RTF with FPV gear.
Total cost should be around $150 with no FPV.
Revisions:
R1.7 - Initial Release
R1.8 - Strengthened Upper and Lower Plates. Removed ESC Slot from Arm. Added FPV
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!