Quadrocopter - Explorer V2

https://youtu.be/phaz_exCX5k

!! Important !!

the rear arms are different:
back-arm-left: has tilt
back-arm-right: no tilt

you have to choose one and mirror ist in cura.

This is the better and stable Version of my Quadrocopter - Explorer V1.

http://www.thingiverse.com/thing:1998043

i split the top and bottom parts because i have a max. 190mm print-area

You need:
4 x M6 screws and bolts for the arms (20 mm)
16 x M4 screws and bolts for the motors (16 mm)
4 x M4 screws and bolts for the top joiner (12 mm)
4 x M4 screws and bolts for the bottom joiner (12 mm)
2 x M4 screws to join the top and bottom front (12 mm)
5 x M4 screws to join the core (mittel part) and bottom (16-18 mm)
2 x M4 screws to fix the top core (12 mm)
4 x M4 screws and bolts the fix the BEC an the FC (Naze32), use the spacer (20-30 mm)

Don´t forget to secure the cabels over the arms.

I use:
- Naze32 full (30mm x 30mm distance between the holes)
- BEC (30mm x 30mm distance between