Quadruped Robot v0.6 (w/ code)

New version V0.6 Released
check:
https://www.printables.com/model/1443108-quadruped-robot-v06-w-code#description-images.3dc9297e-147e-44ac-9ecc-589f33670c78

For more information


A quadruped robot with the capability of computer-vision-based tracking and following. This project was created for a university capstone project. The model is based on an existing open-source project ([Diy quadruped robot](https://grabcad.com/library/diy-quadruped-robot-1)).

**You can support my work and buy me a coffee here: **[Buy me a Coffee!](https://ko-fi.com/tomknox)
It helps a lot and enables me to continue this hobby!

### Print Instructions

Use organic supports where it's needed.
15% infill. Use PETG, ASA, ABS or any other more stiff material.
The Feet can be printed in any material, but something softer like TPU is nice.

**Necessary/Good to have tools needed before starting the project:**

Proper wire cutters, wire strippers a precisions screwdriver set are necessary.
You will also need a s