Quail Breeding Cage

I designed this based on commercially available cage systems on the internet. With a stout enough support frame. these could be stacked several high. I have only stacked 2 sections with a wood frame and it held up well. This is not a print and go project. There is drilling, sanding, and fitting that will need to be done. The cage is held together with only high quality zip-ties. The feed trough I uploaded some time back was designed to fit the
front of this cage system https://www.thingiverse.com/thing:5438087. Water cups are plumbed to the back of the cage. You will need access to a large format printer to build the sides and center sections. Other non-printed items will need to be sourced to complete the cage.
This was a fun project, enjoy!

For one 36" wide 3 section setup you will need the following parts:

1-Front
2-Side_LR_RO
2-Center_W_RO
2-Center_Divider
3-D_Final_New OR
3-D_Final (*same as above but without the lip)
4-Slot_Leg
4-Backing_Plate
2-RO_EndPlate