Quest Courier model rocket

This is the Quest Courier model rocket that's designed to carry an egg (or other things) in its payload bay. It uses 18mm (A through C) motors. I have included the nose cone and the fin cans that will fit Estes BT-55 tubing.

The parts are as follows:
(1) Nose cone
(1) Body tube (35mm OD x 379.41mm)
(1) Launch lug (for 1/8 inch launch rods) 51mm long
(1) Launch lug stand off (60mm x 3mm x 7mm)
(3) Balsa fins (3.0mm thickness)
(2) 14 inch (355.6mm) parachutes
(2) Sets of shroud lines
(2) Sets of adhesive-backed tape disks
(1) 24" Kevlar shock cord
(1) Decal sheet
(1) 18mm motor mount tube
(2) Motor mount rings
(1) Motor clip
(1) Thrust ring
(1) Instruction sheets

Files included here:
1) Nose cone upper half
2) Nose cone lower half/transition (to fit Quest tubing and Estes BT-55 tubing)
3) Nose cone end cap (no hole, 3mm hole, and 7mm hole)
4) Launch lug stand off (straight and conformal)
5) Fin (unrounded and rounded)
6) Fin template (for making your own ba