Quick Adjust G-Clamp With Universal Mount

The clamp prints without supports and snaps together. There are 45 degree overhangs and some bridging involved. If your printer doesn't handle bridging so well, you might want to use supports on the "lever" part.I suggest printing with at least 3 perimeters and a fair amount of infill, to ensure it is suitably stiff.It will be possible to scale this design up and down in size over quite a wide range.There is a short version of the clamp which doesn't extend as far onto the surface you are attaching it too. There is also a "no mount" version without the dovetail mount, for use just as a clamp. This has a larger corner radius, which reduces the stress at the corners and should make it significantly stronger.Follow the video guide for assembly:https://youtu.be/DiqC5PKDQAAThere is a hole through the middle of the dovetail mount, to give the option of using a long M3 screw to hold things in place.I have also included a model of the dovetail mount, and the correspondi