Slicer Discord
Quick Block Mains Supply – Modello 3D stampabile da Thingiverse Thingiverse

Quick Block Mains Supply

27 Download
30 Likes
0 Makes
Vai al Modello
If like me you are forever needing to test electrical items quickly and can do without fussing around looking for the correct mains plug for something that you just want to test the store, then this is for you.
I have seen these for sale commercially and they go from £25 - £50. So I decided to designed one from scratch and build it myself for under £10.
Firstly you are going to need an illuminated power toggle switch, 3 springs and 4 small screws. The screws you will probably have kicking about in your workbench
.
http://www.maplin.co.uk/p/150-part-spring-assortment-n06ct
http://www.maplin.co.uk/p/everel-16a-rocker-switch-spst-illuminated-red-gu51f

I have arranged the build file into colours so that you can print all that you need in each colour at once.
The Live, Neutral and Earth toggles are all colured differently, but you could print them all the same colour and then paint them ( or Not )
You will need a fused mains cable, I used a 3amp fused plug for mine, then run the
Fonte
Thingiverse
Cosa serve per stampare: Intermedio Bassa affidabilità
Perché?
post-lavorazione significativa
Pezzo unico Viteria richiesta
Supporti 1/3
Assemblaggio 0/3
Impostazioni 1/3
Dimensioni piano 0/3
Post-lavorazione 2/3
Stampante
FDM / FFF
Formato file
STL
Materiale
Post-elaborazione
Verniciatura, Viteria
Software
Cura, PrusaSlicer o simile
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione